UV Flatbed with Roll to Roll Printers
A rigid table plus a roll feed on the same frame, for shops that print both boards and banners.
What this range covers
A roll-to-roll UV printer adds a media feed to the flatbed table, so one machine prints rigid sheets and flexible banner, film and wallpaper. Roller widths are 2.5 m and 3.3 m.
Choose by three axes
| Printing size | 2500 x 1300 mm or 3300 x 2100 mm |
|---|---|
| Roller material width | 2500 mm or 3300 mm |
| Media thickness | 0 to 100 mm |
UV Flatbed with Roll to Roll Printers application photos (placeholder)
Photos of this range printing customer material, with a one-line caption naming the material and the model. Six to eight images are enough.
To supply: sales/marketing ยท design: gallery grid
Not sure which model fits?
Send us the material, the largest sheet or roll width and the daily output target.
Ask an engineerFrequently asked questions
What is the difference between the two roll models?
The YC2513R prints 2.5 x 1.3 m and takes a 2.5 m roll. The YC3321R prints 3.3 x 2.1 m and takes a 3.3 m roll.
Can a roll model print on rigid board?
Yes. Both models keep the vacuum table, so rigid sheets print the same way as on a flatbed-only machine.
What media thickness can the roll feed handle?
From 0 to 100 mm on the rigid table. Flexible media runs from the roll at the same head height.
Which printheads are fitted?
Ricoh GEN5 or GEN6, with KM1024I and SPT1024GS also listed as options. Two to eight heads are fitted.
What print speed should I expect?
Between 8 and 33 square metres per hour depending on resolution and pass mode. GEN6 heads run about 40 percent faster.